You might have a little something to celebrate this week with the release of a new flower lamp from Axios.
The light-up, lampshaded lamp is designed to make your kitchen look like a flower.
The device can be built from scrap materials or can be purchased from a home improvement store for around $2,400.
There are a few steps to get started.
You need a couple of pieces of wood and some glass.
The glass can be glued to the top or the sides of the lamp, depending on how much light you want to shine in the room.
The lamp should have a lampshading piece on the front of the top, but it can be painted if you want.
You’ll need a little time to get the lamp up and running.
The first step is to drill the holes for the lampshades.
The holes are fairly shallow, so you might need to use a drill bit or a small chisel to do this.
Next, the glass will need to be chipped off the side of the glass to make the lamp more usable.
The best place to do it is under the glass, not under the lamp.
You can see the inside of the flower lamp and its lampshader on the left.
The plastic lampshaders will also need to come off.
The back of the piece should be removed to make it easy to remove.
You may also want to add some sort of cover to the front, like a plastic sheet or metal plate.
Make sure you get all the pieces in the right order, like so.
Next you’ll need to drill out the holes in the glass.
It might be difficult to get a clean, straight line with a drill, but you can make a bit of noise and see where it goes.
Now that the holes have been drilled, it’s time to paint.
There aren’t many steps involved here, but if you have a bit more experience with wood veneers, you might be able to paint them from a photo.
To get your lampshadings in place, you’ll want to first spray paint them with a light brown primer.
This primer will help the wood to bond with the glass and make it glow brighter.
Next up is a drybrush, which is a thinner paint that’s more flexible.
You could paint it with a thinner spray paint like clear or clear coat, but a bit thinner will help it to stick better.
After that, you can add the pieces of glass.
There’s also a piece of wood that needs to be added to the lamp with a metal plate, which will help hold the lamp in place.
Now you’ll spray paint the front.
It’s important to paint all the edges of the light-colored pieces of paper or plastic.
The paper is the most difficult part to get right, but the metal plate can be added later.
You’re now ready to start assembling the lamp and make sure the lamp isn’t falling off the table.
This is the easiest part to do.
All you need to do is carefully place a piece on top of the rest of the pieces and slide the piece in.
You should be able a nice light and a little space between the pieces to hang it.
Now, the pieces can be put together by hand.
The pieces can all be individually placed on the table, but that’s easy if you’re building it from scratch.
You don’t need to put everything together by machine, either.
The piece that’s placed on top should be facing the rest.
The wood piece is up, and the plastic piece is down.
Once the wood piece has been placed on, you want the other piece to be facing down, too.
That’s where you’ll add the lamp’s lamp shadings.
Once everything is together, the lamp will need a few coats of paint.
The easiest way to get this right is to spray paint a little more than the entire lamp with the light brown paint.
You will need about 2 inches of spray paint for the entire thing.
If you are painting the entire light-color piece first, that will also help hold it in place and make the pieces stick.
Next is to put some sort